3 Series E92 330i (N52K) COUPE
11 00 050
Removing and installing engine (N52K)
Special tools required:
•
11 0 020
Important!
Aluminium-magnesium materials.
No steel screws/bolts may be used due to the threat of
electrochemical corrosion.
A magnesium crankcase requires aluminium screws/bolts
exclusively.
Aluminium screws/bolts must be replaced each time they are
released.
The end faces of aluminium screws/bolts are painted blue for
the purposes of reliable identification.
Jointing torque and angle of rotation must be observed
without fail (risk of damage).
Necessary preliminary tasks:
•
Move engine hood/bonnet into service position
•
Remove exhaust system
•
Remove transmission
•
Drain off engine oil
•
Disconnect battery negative lead
•
Remove intake filter housing
•
Remove fan cowl with electric fan
•
Remove radiator
•
Remove water pump
•
Remove coolant thermostat
•
Detach all coolant hoses from engine
•
Remove microfilter housing
•
Remove intake air manifold
•
Detach vacuum line from brake booster
•
Unfasten ignition wiring harness and lay to one side
•
Unfasten engine wiring harness and lay to one side
RA Removing and installing engine (N52K)
BMW AG - TIS
08.02.2013 07:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
