3 Series E92 330i (N52K) COUPE
11 61 050
Removing and installing air intake manifold
(N52K)
Necessary preliminary tasks:
•
Remove tension strut
•
Remove intake filter housing
•
Remove ignition coil cover
Open holder (2).
Disconnect plug connection (1) under of air intake manifold.
Release both crankcase breathers (3).
Disconnect plug connection (1).
Disconnect plug connection (3).
Release screws (4).
Detach engine wiring harness (2) from air intake manifold and lay
to one side.
Disconnect plug connection (1) on oil pressure switch (2).
RA Removing and installing air intake manifold (N52K)
BMW AG - TIS
08.02.2013 08:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
