3 Series E92 330i (N52K) COUPE
Lambda control sensor, cylinder nos. 4 to 6:
Necessary preliminary tasks:
•
Remove exhaust system.
Disconnect plug connection on lambda control sensor (1).
Release lambda control sensor (1) on exhaust manifold of
cylinder nos. 4 to 6 with special tool 11 4 260 .
All:
Installation:
Cable colour of lambda control sensor, cylinders nos. 1 to 3 =
black.
Cable colour of lambda control sensor, cylinders nos. 4 to 6 =
grey.
Tightening torque 11 78 1AZ
.
Assemble engine.
Check function of DME.
RA Replacing both lambda oxygen control sensors (N52K)
BMW AG - TIS
08.02.2013 08:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -