3 Series E92 330i (N53) COUPE
Unlock fasteners (1) from below and slide upwards approx.
10 mm.
Unlock locks (2) in direction of arrow.
Remove cover (3).
Unlock plug (1) and remove.
Unlock control unit (2) and raise approx. 5 cm.
Press locking tab (1) in direction of arrow and pull contact
carrier (2) out of housing.
Press locking tabs (1) in direction of arrow and pull contact
carrier (2) out of housing.
RA Replacing wiring harness section for ignition coil (N53)
BMW AG - TIS
09.02.2013 21:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -