3 Series E92 330xi (N52K) COUPE
Unlock fasteners (1) from below and slide upwards approx.
10 mm.
Unlock locks (2) in direction of arrow.
Remove cover (3).
Unlock plug (1) and remove.
Unlock control unit (2) and raise approx. 5 cm.
Unlock plug on control unit and disconnect.
Unlock tab (1), pull contact carrier (2) in direction of arrow out of
housing.
Unlock and disconnect all plug connections of ignition coil wiring
harness section in electronics box.
Illustration shows cylinder head cover.
Release screws and remove holder (1).
Tightening torque 12 52 1AZ
.
RA Replacing wiring harness section for ignition coil (N52)
BMW AG - TIS
12.02.2013 22:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
