3 Series E92 330xi (N52K) COUPE
Disconnect Bowden cable (1).
Insert 2 mm dia. punch into hole (A) and press down
catch (3).
Turn lock (2) counterclockwise through 90
°
and remove punch.
Release screws (4) and remove lock element (5) inwards.
Installation:
Position lock element (5) on rear lid and secure with screws (4).
Turn lock (2) 90
°
to right.
Press lock element (5) on rear lid until seal is correctly
positioned.
Tighten down screws (4).
Tightening torque 51 24 3AZ
.
Installation:
Seal (1) on lock element (2) must not be damaged.
Perform function check with rear lid open.
RA Removing and installing/replacing lock element (lock cylinder) for rear lid
BMW AG - TIS
13.02.2013 06:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
