3 Series E92 330xi (N52K) COUPE
Slide locking clip (1) in direction of arrow.
Unclip door window glass (3) with plain bearing from power
window unit.
Turn door window glass (3) and feed towards top rear out of
guide rail (2).
Installation:
Sliding piece (1) with retaining clip must be correctly located in
guide (2).
If necessary, replace defective sliding piece (1).
Clamping plate (3) must be correctly engaged with shim (4) on
door window glass (5).
If necessary, replace defective backing (4).
After installation:
Adjust door window glass.
RA Removing and installing / replacing door window glass, front left or right
BMW AG - TIS
13.02.2013 06:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -