3 Series E92 335d (M57T2) COUPE
Disconnect plug connection (1).
Unlock plug connection (2) in direction of arrow and disconnect.
Pull wiring harness grommet (5) out of electronics box and
remove wiring harness (4).
Pull wiring harness grommet (3) out of electronics box and
remove wiring harness with equipment carrier (6).
Installation:
Make sure wiring harness grommets (3, 5) are correctly seated in
electronics box.
If necessary, press locking tabs (1) in direction of arrow and pull
contact carrier (2) out of housing.
If necessary, press locking tab (1) in direction of arrow and pull
contact carrier (2) out of housing.
Release screws (1).
Replacement:
Modify water drain valve (2) and bump stop (3).
RA Removing and installing/replacing electronics box
BMW AG - TIS
16.02.2013 09:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -