3 Series E92 335d (M57T2) COUPE
Insert special tool 24 4 160 into opening of transmission
housing and tensions slightly with screw (1).
Raise by turning screw (2) and clamp down.
Important!
Risk of damage:
Before the transmission is unflanged, the engine must be
supported with a second lifter! Otherwise the engine will tilt.
Release screws.
Tightening torque, 24 00 1AZ
.
Unflange transmission.
Installation:
Bore (1) in driving disc must be accessible from opening.
Illustration similar.
Check that dowel sleeves are correctly seated.
Replace damaged dowel sleeves.
Illustration similar.
RA Removing and installing automatic transmission (6HP26Z)
BMW AG - TIS
16.02.2013 10:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -