3 Series E92 335d (M57T2) COUPE
Erasure of initialization:
•
Open door window glass fully
•
Actuate power window switch in "Open" position (second
switch position) and hold down for between 15 and 20
seconds
This erases initialization of the power window, anti-trapping
protection and toll function are inactive.
Check whether one-touch control (toll) function is inactive,
otherwise repeat procedure.
Reinitialization:
•
Close door window completely
•
Once the upper end position has been reached, hold power
window switch in "Close" position (second switch stage) for
approx. 2 seconds longer
This completes initialization.
Note:
Carry out function check (one-touch control function, anti-trapping
protection and, if necessary, comfort function).
RA Notes on initializing power window unit in front door
BMW AG - TIS
18.02.2013 00:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -