3 Series E92 335d (M57T2) COUPE
1
Blind rivet dia. 6.4 mm
4
Blind rivet dia. 6.4 mm
2
Blind rivets dia. 6 mm
5
Blind rivet dia. 6.4 mm
2.1 Elongated hole
6
Blind rivet dia. 6.4 mm
2.2 Round hole
7
Blind rivet dia. 6.4 mm
3
Blind rivet dia. 6.4 mm
8
Blind rivet dia. 6.4 mm
-
When removing blind rivet 3 or 8, 100 % foaming is necessary
-
When removing blind rivet 4, also replace blind rivets 3 and 5
-
When removing blind rivet 7, also replace blind rivet 6
-
In the event of a bent or faulty pin or apparent riveting when the gas generator is removed, it will be necessary to
replace the complete head airbag
Note:
It is permitted to replace individual rivets without replacing the complete head airbag.
Rivet heads 1, 2, 4 and 7 can be collected with special tool 72 1 200 .
Rivet heads 3 and 8 cannot be accessed with special tool; cavity has to be filled with foam beforehand.
Rivet heads 5 and 6 - no special tool required.
RA Removing and installing or replacing left or right head airbag
BMW AG - TIS
18.02.2013 00:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -