3 Series E92 335i (N54) COUPE
Support engine with special tool 11 7 310 on steering gear.
Evacuate A/C system.
Release screws (1) for A/C lines.
Disconnect plug connection (2) on A/C compressor.
Do not remove A/C compressor.
Release bolts (1 and 2) from power steering pump bracket.
Set power steering pump down on front axle carrier.
Note:
Do not disconnect hydraulic lines.
If Dynamic Drive optional extra is fitted, release bracket.
Disconnect fuel lines (1 and 2).
Seal off fuel line (1) with special tool 11 5 281 .
Seal off fuel line (2) with special tool 11 5 282 .
RA Removing and installing engine (N54)
BMW AG - TIS
18.02.2013 17:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
