3 Series E92 335i (N54) COUPE
Necessary preliminary tasks:
•
Remove underbody protection with bracket at front and rear.
•
Remove fan cowl with fan
•
Remove complete exhaust system
•
Remove heat shields
•
Support engine with lifter when removing transmission
Release screws (1).
Remove heat shield (2).
Disconnect connector (3).
Bracket remove.
Remove cables (1) from holder (3).
Release screws (2) and remove holder (3).
Disconnect plug connector (1).
Release screws (2).
Remove cover plate (3).
Tightening torque 24 11 2AZ
.
Note:
Illustration similar
RA Removing and installing automatic transmission (GA6HP19Z) N54
BMW AG - TIS
18.02.2013 20:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -