3 Series E92 335i (N54) COUPE
Note position of sealing sleeve.
Pull out sealing sleeve (1).
Installation:
Screw in sealing sleeve partially (lug in upper area). Turn until lug
engages in groove of transmission. Slide in sealing sleeve.
Lug on sealing sleeve must not be damaged!
Note:
GA6HP19Z
Release all screws (1 and 2).
-
1 = M6 x 58 mm
-
2 = M6 x 20 mm
Remove mechatronics.
Note:
GA6HP19Z TU
Release all screws (1 and 2).
-
1 = M6 x 58 mm
-
2 = M6 x 20 mm
Remove mechatronics.
Important!
Only installed in E65!
Mechatronics without protective bar for solenoid valve must
not be reused after removal.
RA Replacing mechatronics (GA6HP19Z)
BMW AG - TIS
18.02.2013 20:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -