bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Removing And Installing_replacing Auxiliary Water Pump (N54)|Page 2545 > < 5 RA Replacing Controller For Heater_air Conditioner Fan
Page 1
background image

64 11 262

Removing and installing/replacing auxiliary
water pump (N54)

Warning!

Danger of scalding!

Only perform this work after engine has cooled down.

Follow instructions for working on cooling system.

Recycling

Coolant emerges when coolant lines are detached. Have a
suitable collecting container ready.

Catch and dispose of emerging coolant.

Observe country-specific waste-disposal regulations.

Release hose clamps (1) and detach coolant hoses.

Disconnect plug connection (2) and remove auxiliary water
pump (3) towards top.

Installation:

Install auxiliary water pump (1) in front engine bracket so that
rubber mounts (2) slide exactly in associated locators (3).

RA  Removing and installing/replacing auxiliary water pump (N54)

BMW AG - TIS

19.02.2013  07:24

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

6 RA Removing And Installing_replacing Auxiliary Water Pump (N54)|Page 2545 > < 5 RA Replacing Controller For Heater_air Conditioner Fan