3 Series E92 335xi (N54) COUPE
Check position of intake camshaft (1) at 6th cylinder.
Roller cam follower (2) is not actuated.
Tighten lower and upper bearing banks with special tool
00 9 120 .
Tightening torque: 11 31 1AZ
.
Important!
Remove special tool 11 8 553 only when camshaft screw
connection is completed.
Adjust valve timing.
Assemble engine.
RA Removing and installing or replacing intake camshaft (N54)
BMW AG - TIS
20.02.2013 05:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -