3 Series E92 335xi (N54) COUPE
Tighten central bolt to jointing torque.
Tightening torque: 11 21 1AZ
.
Apply stroke of paint (1) for torsion angle tightening to tool.
See illustration.
Important!
Do not remove tool from central bolt during torsion angle
tightening - risk of damage.
Installation:
Replace radial seal at front.
Assemble engine.
RA Removing and installing/replacing chain module for oil pump/vacuum pump (N54)
BMW AG - TIS
20.02.2013 05:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -