3 Series E92 335xi (N54) COUPE
Release screws (1 and 2).
Tightening torque: 11 53 2AZ
.
Remove water pipe in direction of arrow.
Installation:
Seal (1) must not show any traces of damage; check and if
necessary replace.
Release screws (1).
Tightening torque: 11 53 3AZ
.
Disconnect water pipe (2).
Installation:
Replace all seals.
Assemble engine.
Vent cooling system and check for leaks.
RA Removing and installing or replacing water pipe (N54)
BMW AG - TIS
20.02.2013 05:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -