3 Series E92 335xi (N54) COUPE
Release screws (1).
Tightening torque: 11 53 9AZ
.
Remove feed line (2).
Installation:
Replace O-ring.
Release screw (1).
Tightening torque: 11 53 8AZ
.
Release coolant return pipe if necessary with suitable pliers.
Important!
Do not position pliers on pipes - risk of damage!.
Installation:
Replace O-ring.
Release screw (1).
Release coolant return pipe (3) if necessary with suitable pliers.
Release coolant return pipe (2) if necessary with suitable pliers
and remove.
Important!
Do not position pliers on pipes - risk of damage!.
Installation:
Replace O-ring.
Release screw (1).
Tightening torque: 11 42 4AZ
.
Detach oil feed line in direction of arrow.
Installation:
Replace O-ring.
RA Removing and installing/replacing exhaust-gas turbocharger for cylinders 4-6 (N5
BMW AG - TIS
20.02.2013 05:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -