3 Series E92 335xi (N54) COUPE
Disconnect plug connection for oxygen control sensor, cylinders
1 to 3.
Release oxygen control sensor (1) with special tools 11 7 030
and 11 9 150 .
Tightening torque: 11 78 1AZ
.
Installation:
Cable colour black, cylinders 1 to 3.
Disconnect plug connection for oxygen control sensor, cylinders
4 to 6.
Release oxygen control sensor (1) with special tools 11 7 030
and 11 9 150 .
Tightening torque: 11 78 1AZ
.
Installation:
Cable colour gray, cylinders 4 to 6.
Assemble engine.
Check function of DME.
RA Removing and installing/replacing both lambda oxygen control sensors (N54)
BMW AG - TIS
20.02.2013 05:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -