3 Series E92 335xi (N54) COUPE
11 61 368
Replacing charge-air duct (N54)
Necessary preliminary tasks:
•
Switch off ignition
•
Remove intake filter housing
Important!
Charge-air hoses with clamp fastenings must be installed dry
and free from grease!
If charge-air hoses with clamp fastenings are not installed dry
and free from grease, this may result in turbocharger failure!
Unfasten clip.
Tightening torque 13 71 6AZ
.
Installation:
Install charge-air hoses dry and free from grease.
Detach charge-air hose (1) from charge-air duct (2).
Release quick-connect couplings (1) by turning lock through 90
°
.
Detach recirculated air hoses (2) and lay to one side.
RA Replacing charge-air duct (N54)
BMW AG - TIS
20.02.2013 06:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -