3 Series E92 335xi (N54) COUPE
Release screws (1) and remove cover (2) from left side of fuel
tank.
Disconnect plug connection (1).
Press grey ring (1) towards sensor unit and detach fuel feed
line (3).
Important!
Do not use any tools to release the quick-release fasteners.
Release screw cap with special tool 16 1 020 and remove
service cap.
Installation:
Tightening torque 16 14 1AZ
.
Important!
After tightening to specified torque, notch (1) on screw
cap (2) must be in area (A)!
Note:
Illustration shows the tank removed.
RA Removing and installing / replacing fuel filter with pressure regulator
BMW AG - TIS
20.02.2013 06:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -