3 Series E92 335xi (N54) COUPE
Installation:
Tighten down screws/bolts to specified torque.
Secure special angle of rotation tool 00 9 120 with magnet
00 9 130
to underbody and screw down blue aluminium screws/bolts in
accordance with angle of rotation.
Angle of rotation 24 00 2AZ
.
Installation:
Bore (1) in driving disk must be accessible from opening on
engine oil pan.
Check that dowel sleeves are correctly seated.
Replace damaged dowel sleeves.
Installation:
Rotate torque converter until bore in torque converter is flush with
bore in driving disk.
Flange automatic transmission to engine.
RA Removing and installing automatic transmission (GA6HP19Z) N54
BMW AG - TIS
20.02.2013 07:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -