3 Series E92 335xi (N54) COUPE
25 16 056
Removing and installing/replacing shift tower
(AWD) (Steptronic)
Necessary preliminary tasks:
•
Remove rear underbody protection.
•
Remove centre console.
Move selector lever to parking position "P".
Release screw (1).
Tightening torque 25 16 2AZ
.
Remove clamp (2).
Release shift cable head (3) using a screwdriver from ball head
of shift cable lever.
Installation:
Adjust selector lever
Release screws (1).
Tightening torque: 25 16 3AZ
.
Feed sleeve (2) out of body.
Lift shift tower out of centre console.
Installation:
Seal must not be damaged.
RA Removing and installing/replacing shift tower (AWD) (Steptronic)
BMW AG - TIS
20.02.2013 08:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -