3 Series E92 335xi (N54) COUPE
27 10 050
Replacing output flange for front axle output
(ATC 300)
Important!
Do not move vehicle with drive power once propeller shaft has
been removed.
Replace output flange only in conjunction with a new radial
shaft seal.
After completion of work, check transmission fluid level.
Use only the approved transmission fluid.
Failure to comply with this requirement will result in serious
damage to the transfer box!
Operation is identical to Replacing radial shaft seal for front axle
output.
RA Replacing output flange for front axle output (ATC 300)
BMW AG - TIS
20.02.2013 08:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -