3 Series E92 335xi (N54) COUPE
32 00 ...
Troubleshooting after chassis/wheel alignment check
Substandard roadholding, atypical noises, tyres worn on one side and toe-in/camber values which deviate from the
nominal value are all indicators of damage to the suspension caused by road traffic accidents or similar impacts.
You must also follow the rules and guidelines for accident-related repairs to the steering gear.
Procedure:
-
Ride-height problems:
I)
Check load, correct if necessary (e.g. luggage compartment)
II)
Check coil springs for damage/correct seating, replace if necessary
-
Setting problems:
I)
Tighten all suspension screw/bolt connections to specified torque
II)
Check all suspension components for deformation/damage or retrofits, replace if necessary
Caution!
When replacing deformed or damaged suspension components, also check the adjoining components for
damage and replace if necessary (comply with repair instructions).
Note:
If after chassis/suspension components have been replaced adjustment of camber/track alignment is not
possible, the vehicle must be placed on the body straightening bench.
RA Troubleshooting after chassis/wheel alignment check
BMW AG - TIS
20.02.2013 09:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -