3 Series E92 335xi (N54) COUPE
E93: Remove cable duct.
Remove protective cap.
Release nut (1); if necessary, grip at hexagon head.
Remove support bearing upper section (2).
Installation:
Replace support bearing upper section (2).
Tightening torque 33 52 1AZ
.
Press shock absorber together and remove from wheel arch.
Installation:
Remove support bearing (lower section), check for damage and if
necessary replace.
Check auxiliary damper and protective tube for damage, replace if
necessary.
Replacement:
•
Remove support pot (1) and auxiliary damper (2) with
protective tube (3) from rear shock absorber (4)
RA Removing and installing/replacing rear left or right shock absorber
BMW AG - TIS
20.02.2013 10:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -