3 Series E92 335xi (N54) COUPE
41 12 590
Replacing luggage compartment floor
(complete with left or right inner wheel arch
section, tail panel removed)
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 12 590).
Remove or cover those vehicle components in the repair area
which are susceptible to heat or dust.
Spot-weld bonding is used on this vehicle. Observe specific
procedure.
Use only approved spot-welding apparatus for repairs!
Place vehicle on straightening bench.
Following new body parts are required (refer to Electronic Parts
Catalogue ETK):
-
(1) Luggage compartment floor, upper section
-
(2) Rear axle carrier
-
(3) Wheel arch, rear, inner half, left
-
Touring only:
(4) Bracket, tension strut, rear (not illustrated)
Mark severance cut in accordance with measurement a and cut.
Measurement a=40 mm behind support, frame side
member (1).
Installation:
Weld in reinforcement plates at severance cuts.
RA Replacing luggage compartment floor (complete with left or right inner wheel arc
BMW AG - TIS
20.02.2013 12:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -