Removing and Installing Interior Rearview Mirror for 3 Series E92 335xi (N54) Coupe
Installation:
Retaining hooks (1 and 2) of end caps (3) must not be
damaged.
Disconnect plug connections (1 and 2).
Installation:
If necessary, pay attention to cable routing for rain sensor.
Important!
Risk of damage!
Do not pull off rearview mirror (1) from windscreen against
direction of travel and or snap out by turning.
When snapping out, avoid damaging rain sensor (3).
Carefully press mirror (1) forwards out of mirror base (2).
If mirror (1) rests on rain sensor (3), snap mirror (1) out in
inward direction.
Installation:
1.
Twist mirror foot by approx. 45
°
and fit to mirror mount.
2.
Turn mirror foot until it engages on mirror base.
RA Removing and installing/replacing interior rearview mirror (with Autobeam)
BMW AG - TIS
20.02.2013 13:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -