3 Series E92 335xi (N54) COUPE
Feed out Bowden cable (1) in direction of engine compartment.
Installation:
Lay Bowden cable (1) without kinks.
Important!
Grommet (2) must not be damaged.
Check that grommet (2) is correctly seated (water ingress).
Unclip coupling (1) from side panel.
Lever out cover (2) at coupling (1).
Lever Bowden cable (3) out of coupling (1) and remove.
RA Removing and installing/replacing cable for front engine hood locks (to passenge
BMW AG - TIS
20.02.2013 14:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -