3 Series E92 335xi (N54) COUPE
51 31 241
Replacing rubber frame (top/side) for rear
window
Open rear lid.
Note:
For purposes of clarity, illustrations do not show the rear lid.
Important!
Rubber frame (1) features an aluminium section inlay (2).
Carefully unwind rubber frame (1) (rear window breakage).
Note:
Tear-off lip (5) may be stuck to adhesive (4).
When rubber frame (1) is removed, tear-off lip (5) can tear off
and remain in vehicle.
3
Rear window
6
Bridge
7
Pinched butyl
Installation:
Pay attention to centre marking on rubber frame (1) and
windscreen.
Replacement of rubber frame without rear window removal:
Detach tear-off lip (3) from rubber frame (1).
If adhesive has managed to get onto bridge (4), this area must be
cut out partially.
To facilitate installation, coat rubber frame (1) and body cutout
with water.
Replacement of rubber frame with removed or new rear window:
Fit rubber frame (1) with tear-off lip (3).
2
Aluminum strip
5
Butyl
RA Replacing rubber frame (top/side) for rear window
BMW AG - TIS
20.02.2013 14:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -