3 Series E92 335xi (N54) COUPE
51 41 090
Replacing light strip on door trim panel at
front
Necessary preliminary tasks:
•
Remove LED for front door trim panel light
Important!
Risk of damage
Handle light strip with care.
Do not knock fibre optic cables.
Position new light strip on door trim panel (2) and mark welding
spots (1) to be opened.
Drill out welding spots (1).
Note:
Only drill down to door trim panel area so as not to damage the
contact surface.
Feed light strip out of door trim panel (2).
Remove all remnants of plastic from contact surface of door trim
panel (2).
Installation:
Carefully feed light strip in area (1) into door trim panel.
Push welding pins (3) through holes into door trim panel and
secure with locking washers (2).
Shorten welding pins (3) down to measurement (A).
A = 3 mm
RA Replacing light strip on door trim panel at front
BMW AG - TIS
20.02.2013 14:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -