3 Series E92 335xi (N54) COUPE
61 35 015
Removing and installing (replacing) control
unit for Car Access System
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Note:
The comfort access system is a radio-based system and can be
interfered with by radio waves from other systems (e.g. mobile
phone).
Necessary preliminary tasks:
•
Remove trim for pedal assembly
Disconnect plug connection (2).
Important!
Carefully disconnect plug connection for ribbon cable (1).
Replace the ribbon cable if damaged.
The ribbon cable leads to:
•
Insert for radio control key
•
Start/Stop switch
Release screw (3).
Feed out control unit for Car Access System (4) to left and
remove in downward direction.
RA Removing and installing (replacing) control unit for Car Access System
BMW AG - TIS
20.02.2013 18:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -