3 Series E92 335xi (N54) COUPE
61 35 095
Removing and installing/replacing control
unit/module for seat heating
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Note:
Move seat completely towards rear/top.
Disconnect plug connection (1).
Open lock (2) in direction of arrow and remove control
unit/module for seat heating (3) towards bottom.
Installation:
Make sure control unit/module for seat heating (3) is correctly
engaged.
RA Removing and installing/replacing control unit/module for seat heating
BMW AG - TIS
20.02.2013 18:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -