3 Series E92 335xi (N54) COUPE
64 11 869
Replacing servodrive for blending flap
Important!
Servomotors must be re-addressed in the event of
replacement!
Addressing can only be carried out with the BMW diagnosis
system.
Service functions:
-
Body
-
Heating and A/C function
-
Flap motors
-
Re-address flap motors
Necessary preliminary tasks:
•
Remove trim panel for pedal assembly.
Unfasten plug connection (1) and disconnect.
Release screws (2).
Detach servodrive for blending flap (3) in direction of arrow from
heater/air conditioner (4).
Installation:
Place servodrive for blending flap (3) over guide pin (5).
RA Replacing servodrive for blending flap
BMW AG - TIS
20.02.2013 20:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -