3 Series E92 335xi (N54) COUPE
72 11 010
Removing and installing or replacing left or
right belt handover
Necessary preliminary tasks:
•
Remove rear side trim panel
Unlock plug connections (1) and disconnect.
Unscrew nuts (2).
Tightening torque 72 11 07AZ
.
Note:
If the screw head spins, hold the head in the lateral position with a
pair of pliers. The screws must be replaced each time they are
removed as the applied screw securing adhesive can only be
used once.
Belt handover:
1.
must be swung out in direction of arrow and
2.
fed out of side trim panel.
Installation:
Insert sleeves (1) correctly into rubber mount (2).
RA Removing and installing or replacing left or right belt handover
BMW AG - TIS
20.02.2013 21:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -