3 Series E92 335xi (N54) COUPE
-
JBE: Junction box electronics
The junction box electronics is the gateway between the PT-CAN and the K-CAN. Moreover, the diagnosis cable
is connected to the junction box electronics (see Service functions).
-
CA: Comfort Access
For vehicles with Comfort Access:
Under certain conditions the CBS data is saved on the identification signal unit. For this to happen, the
identification signal unit should not be in the insert compartment. The CA control unit transfers the data via the
interior aerial (radio).
-
TCU or ULF: Telematics control unit or universal charger and hands-free system
The control unit for the telephone is needed for an automatic or manual ServiceCall (TeleService 2 at BMW
Assist telematics service centre).
The ServiceCall triggers the instrument cluster.
The TCU or the ULF (universal charger/hands-free system) receives the data as follows:
Instrument cluster -> K-CAN -> CCC or M-ASK (gateway) -> MOST -> TCU or ULF
System functions
With the Condition Based Service a maximum of 10 maintenance operations are realised:
-
Engine oil
-
Diesel particulate filter (either as standard or option)
*changed with new definition*
-
Microfilter
*changed with new definition*
-
Front brake pads
-
Rear brake pads
-
Spark plugs
*changed with new definition*
-
Vehicle check
-
Brake fluid
-
Statutory vehicle inspection
-
Statutory emissions test
*changed with new definition*
-
Pre-delivery check
(service function)
For reasons of clarity, maintenance operations and their intervals will be given first (valid for EURO vehicles).
In certain countries, different values may be applicable for e.g. engine oil or spark plugs.
Scope
Interval
Starting value/interval forecast
Time reference
(calculated by)
Distance
[km]
Time
[months]
Engine oil
(DME/DDE)
flexible
DME: 25.000
DDE: 30.000
24
On-board date
Diesel particulate filter
SBT Condition Based Service E87, E90, E91, E92, E93
BMW AG - TIS
21.02.2013 05:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -