3 Series E92 M3 (S65) COUPE
Affected vehicles:
E92
Manufacturing period: from start of series production until August 2006
Action:
in case of customer complaint, replace the belt hand-over hand on the left and right on
vehicles from the manufacturing periods listed under point A).
Important:
Partial disengaging of the belt hand-over hand is a form of trap protection and
does not constitute a functional fault.
For this reason, clipping a loose belt hand-over hand back in does not merit a
warranty application.
Procedure:
Extend belt hand-over (1) without belt
hand-over hand.
Insert new belt hand-over hand (1) in
the belt hand-over (2).
Push in new belt hand-over hand (1)
until the detent lug (3) audibly engages.
Note:
Distinguishing feature on belt
hand-over hands:
-
Previous belt hand-over
hand (1) with a detent lug
(2) and broken-off
retainer.
-
New belt hand-over hand
(3) with detent lug (4) and
modified retainer (5).
SI Belt hand-over hand loose E92
BMW AG - TIS
21.02.2013 17:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -