3 Series E92 M3 (S65) COUPE
33 32 160
Removing and installing/replacing
compression strut for rear axle carrier
Important!
Observe safety instructions for raising the vehicle
Risk of damage!
Driving without the compression strut is not permitted!
The rear axle carrier must be supported if it is necessary to
replace both compression struts!
Necessary preliminary tasks:
•
Remove underbody cover
Release nuts (1 and 2).
Slacken screws (3) and release screws (4).
Installation:
Replace self-locking nut.
Tightening torque 51 61 7AZ
.
Release screws (1).
Installation:
Tightening torque 33 33 2AZ
.
Release screw (2) and remove compression strut (3).
Installation:
Tightening torque 33 33 1AZ
.
RA Removing and installing/replacing compression strut for rear axle carrier
BMW AG - TIS
21.02.2013 17:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
