3 Series E92 M3 (S65) COUPE
Release cylinder head bolt (1) with special tool 11 2 250 .
Release cylinder head bolts from outside to inside in sequence
(10 to 1).
Note:
Replace cylinder head gasket.
Check cylinder head for water leaks.
Installation:
Fit new cylinder head screws.
Tighten down cylinder head bolts from inside to outside in
sequence (1 to 10).
Tightening torque: 11 12 1AZ
.
RA Removing and installing right cylinder head (S65)
BMW AG - TIS
21.02.2013 18:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
