3 Series E92 M3 (S65) COUPE
Important!
The connecting rods are not symmetrical.
Pay attention to elevation to direction of travel arrow.
Make sure the connecting rod is in the correct installation position
during preliminary installation.
On cylinders 6-10 the elevation (2) must point forwards with the
arrow.
On cylinders 1-4 the elevation (1) must point rearwards against
the arrow.
Valve pockets (E) point to inlet side.
Arrow direction is identical to direction of travel.
On cylinders 5-8 the elevation must point forwards with the arrow.
On cylinders 1-4 the elevation (1) must point rearwards against
the arrow.
Important!
No elevations on the connecting rod big end are permitted to
point to each other during installation, risk of damage to
connecting rod.
Installation:
When installed, the two lugs on connecting rods (1 and 2) must
point outwards.
RA Removing and installing/replacing all pistons (S65)
BMW AG - TIS
21.02.2013 18:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
