3 Series E92 M3 (S65) COUPE
11 31 032
Removing and installing or replacing left inlet
camshafts (S65)
Necessary preliminary tasks:
•
Remove left cylinder head cover.
•
Remove left VANOS exhaust gear
•
Remove left VANOS inlet gear
Release screws (1).
Tightening torque: 11 12 2AZ
.
E
Intake camshaft
A
Exhaust camshaft.
Important!
Risk of mix-up with cylinder bank 1-5.
Arrow (2) must point in direction of travel to chain drive.
Installation:
Lubricate all bearing points with engine oil.
Release screws (1) from outside inwards in 1/2 turns.
Tightening torque: 11 12 2AZ
.
Remove inlet camshaft for cylinders 5 to 8.
Do not place timing chain in gearcase.
Secure timing chain (1) against falling down with a cable tie (3)
to one screw (2).
RA Removing and installing or replacing left inlet camshafts (S65)
BMW AG - TIS
21.02.2013 18:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
