3 Series E92 M3 (S65) COUPE
11 31 036
Removing and installing/replacing left
exhaust camshaft (S65)
Necessary preliminary tasks:
•
Remove left cylinder head cover.
•
Remove left VANOS exhaust gear
Release screws (1).
Tightening torque: 11 12 2AZ
.
E
Intake camshaft
A
Exhaust camshaft.
Important!
Risk of mix-up with cylinder bank 1-4.
Arrow must point in direction of travel to chain drive.
Remove bearing cap (2).
Installation:
Lubricate all bearing points with engine oil.
Release screws (1) from outside inwards in 1/2 turns.
Tightening torque: 11 12 2AZ
.
Installation:
Lubricate all bearing points with engine oil.
RA Removing and installing/replacing left exhaust camshaft (S65)
BMW AG - TIS
21.02.2013 18:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -