3 Series E92 M3 (S65) COUPE
Position of exhaust camshafts, cyl. 5-8, in firing TDC position of
cylinder no. 1.
Dihedron of camshafts is vertical to cylinder axis, letters/numbers
on camshafts point upwards (A2).
Place special tool 11 9 971 on inlet camshaft.
Designation (E2) on dihedron points upwards.
Place special tool 11 9 972 on exhaust camshaft.
Designation (A2) on dihedron points upwards.
Secure special tools 11 9 971 and 11 9 972 with bolts (1) on
cylinder head to 10 Nm .
Align gearwheels on exhaust adjustment unit with special tool
11 5 370 .
Important!
Removal/installation is not possible without hexagon socket
screw (2).
Hexagon socket screw (1) must not be longer than 10 mm.
Gearwheels of exhaust VANOS gear are pretensioned with a
spring.
Insert M5x10 hexagon socket screw on VANOS gear.
Note:
Picture shows cylinders 1-4.
RA Removing and installing/replacing left inlet VANOS gear (S65)
BMW AG - TIS
21.02.2013 18:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -