3 Series E92 M3 (S65) COUPE
Disconnect plug connection (1) on coolant temperature sensor.
Disconnect plug connection (2) on solenoid valve.
Unlock coolant hoses and detach.
Release screws (1).
Installation:
Replace sealing rings.
Remove thermostat housing with thermostat forwards in direction
of arrow.
Clean sealing surfaces.
Remove thermostat (1).
Check rubber section (2) for damage.
Remove connecting pipes (2).
Installation:
Replace all O-rings on connecting pipes.
RA Removing and installing/replacing coolant thermostat (S65)
BMW AG - TIS
21.02.2013 18:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
