3 Series E92 M3 (S65) COUPE
13 62 560
Removing and installing/replacing air-mass
sensor (secondary air) (S65)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
Remove intake air manifold
Unlock connector and remove.
Release hose connections.
Pull air-mass flow sensor (1) from air intake hose.
Installation:
Check sealing ring between air-mass sensor and air intake hoses
for damage, replace if necessary.
Assemble engine.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Removing and installing/replacing air-mass sensor (secondary air) (S65)
BMW AG - TIS
21.02.2013 18:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
