3 Series E92 M3 (S65) COUPE
Remove oxygen control sensor with special tool 11 7 030 .
If the oxygen control sensor is reused, apply a thin and even coat
of Never Seez Compound (refer to BMW Parts Service) to the
thread only.
The part of the oxygen control sensor which projects into the
exhaust system branch (sensor ceramic) must not be cleaned or
come into contact with lubricant.
Secure oxygen control sensor with special tool 11 7 030 and a
torque wrench (1).
Tightening torque: 11 78 1AZ
.
Check function of DME.
RA Replacing left lambda oxygen control sensor (S65)
BMW AG - TIS
21.02.2013 18:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
