3 Series E92 M3 (S65) COUPE
Unlock plug (1) and remove.
Release grommet (2) from electronics box.
Installation:
Make sure grommet (2) is correctly seated in housing
(watertightness).
Unlock control unit (3) and raise slightly.
Unlock plugs (1) using slide in direction of arrow and remove.
Remove control unit (2).
Installation:
Replacement:
Note device identification number and coding.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Replacing control unit (DME) (S65)
BMW AG - TIS
21.02.2013 19:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
