bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Replacing Plug-in Contact For Intake Air Temperature Sensor (S65) > < 3 RA Checking Alternator (BSD)|Page 508
Page 1
background image

12 31 020

Removing and installing or replacing
alternator (S65)

Necessary preliminary tasks:

Switch off ignition

Follow instructions for disconnecting and connecting battery

Disconnect battery negative lead and cover

Remove air filter housing

Remove underbody protection

Remove alternator drive belt

Release screws.

Unclip hoses from hose holders on radiator.

Carefully press leads (1) to one side.

Release screws.

Pull alternator (1) forwards until connections are accessible.

Unlock plug (1) and remove.

Release nut (2), remove battery positive lead from alternator.

Tightening torque  12 31 1AZ

.

Pull alternator (3) upwards to remove.

Add final details to vehicle.

Read fault memory.

RA  Removing and installing or replacing alternator (S65)

BMW AG - TIS

21.02.2013  19:20

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

5 RA Replacing Plug-in Contact For Intake Air Temperature Sensor (S65) > < 3 RA Checking Alternator (BSD)|Page 508