3 Series E92 M3 (S65) COUPE
12 41 020
Removing and installing/replacing starter
(S65)
Necessary preliminary tasks:
•
Switch off ignition
•
Disconnect battery negative lead and cover
•
Remove intake air manifold
•
Remove idle actuator
•
Remove throttle valve actuating motor on left
Remove idle actuator mounting.
Unlock plug (1) and remove.
Unfasten nut.
Tightening torque 12 41 1AZ
.
Remove battery positive lead (2).
Release screw (1).
Release screws (2).
Tightening torque 12 41 2AZ
.
Pull starter motor out of transmission mount and remove.
RA Removing and installing/replacing starter (S65)
BMW AG - TIS
21.02.2013 19:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -